Staining Wet Pressure Treated Wood

Using a brush apply at least two coats of latex paint to see best results.
Staining wet pressure treated wood. The easiest way to wash new wood is to knock loose any dirt or residue using a. Premium pressure treated lumber has been dried after its pressure treatment to remove excess moisture. Most fences are built with pressure treated wood.
Pressure treated wood is ready to stain when it is no longer retaining the excess moisture from the treatment process. Yes you can absolutely stain pressure treated wood. On average you ll want to wait 4 weeks to 6 months to wait before staining the posts.
You have posts for the frame 4x4s and 2x4s and 1x4s or 1x6s for the pickets. It has already been prepared and all the moisture has been removed. Decide the suitable stain product and color for the lumber.
Prepare the surface you plan to paint. If it is still wet it is likely to develop blisters and cracks. If you have bought premium pressure treated lumber it can be stained as soon as you get it.
This is largely dependent on how humid your area is. Before you stain pressure treated wood you should clean it first. Ordinary pressure treated lumber from.
As i said it s typically recommended that you wait six months before staining new installed pressure treated wood. Here in oregon that means buy the wood and store it in a dry place. Apply the stain 20 minutes to 2 hours after you applied the first coat.